Spouting Hawke's Bay
Continuous Spouting Profiles & Colours
Roll-formed on site in one continuous run, in colour steel, copper or galvanised. From the original continuous spouting company in New Zealand, here since 1985.
The range
6 Spouting Profiles to Choose From
Four profiles are roll-formed on site to the length of your roofline. Box Gutter and 1/2 Round come in lengths, not a continuous run.
135mm O.G. Spouting
The classic 5 inch O.G. in the standard size.
150mm O.G. Spouting
The 6 inch O.G., for bigger roofs.
135mm 1/4 Round Spouting
A clean, rounded face.
145mm Deep Quad Spouting
A similar, modern look to the 135mm 1/4 Round Spouting.
125mm Box Gutter
Square profile, in lengths, not a continuous run.
150mm 1/2 Round Spouting
Half round, in lengths, not a continuous run.
Colour chart
Choose Your Colour
Spouting, downpipes and fascia come in these 23 ColorCote colours. Screen colours are a guide only, so ask to see a sample when we visit.
- Threadbow White
- Pacific Cloud
- Titania
- Gull Grey
- Smooth Cream
- Desert Sand
- Sandstone Grey
- Weathered Copper
- Lignite
- Thunder Grey
- Windsor Grey
- Mist Green
- FlaxPod
- Grey Friars
- Rivergum
- Slate
- Karaka
- Permanent Green
- Ironsand
- New Denim Blue
- Black
- Pioneer Red
- Scoria
-
Materials
Colour Steel, Copper or Galvanised
Most homes choose colour steel. The paint is baked on, so it never needs repainting. For something special, we also make continuous spouting in copper. Galvanised is also available, and is more suited to outbuildings.
- Replacement spouting for leaking, sagging or rusted runs
- New spouting for new builds, extensions and re-roofs
- Downpipes to match, in the same colour
Spouting replacement
Need to Replace Your Spouting?
Overflowing, sagging or rusting? We'll measure up and send you a free, no obligation quote. If a repair will do, we'll tell you.
Frequently Asked Questions
What is the best order to do things in if I need new spouting and my roof needs painting?
Paint the roof first, so any paint that lands on the old spouting goes when it's removed. Then paint the fascia, and we put the new spouting up.
Do I need to repaint the spouting and downpipes?
No. Colour steel has a baked-on paint finish that resists UV and holds its colour, so it never needs touching up.
Can I get a ballpark figure or a per metre rate over the phone?
A site visit is always recommended. The price depends on which spouting profile is best suited, how many angles, stops and drops there are, whether the house is two storey, and how far out of town it is. So get in touch and we'll come out and give you a free, no obligation quote.
Do you install PVC spouting?
No. PVC comes in lengths, which means more joins that can leak. Our colour steel, copper and galvanised spouting is made on site in one run.
Should I choose copper, colour steel or galvanised?
Copper is the ultimate spouting, but it costs over three times as much as colour steel. Colour steel suits most homes: it never needs repainting and comes in 23 colours. Galvanised is more suited to outbuildings.
Free Onsite Visit & Quote
We'll come out, measure up and quote the right profile and colour for your home.
- We call you to arrange a time.
- We come out and look at the job, free.
- Your written quote is normally sent within 2 business days, no obligation.